Hengwang Heavy Industry Bulldozer Full Cycle Maintenance Guide(1)
May 14, 2025
Get a new Hengwang bulldozer but don't know how to maintain it?
Correct maintenance methods can extend the service life of the bulldozer. Follow the steps to ensure that your operating efficiency is improved to a higher level.
The newly received machine needs to be fully inspected. If you don’t know where to start, you can look at this table first.
Check before starting:
| 1 | Inspect for leaks in hydraulic systems or coolant lines |
| 2 | Check and tighten loose bolts/nuts |
| 3 | Inspect wiring connections and insulation |
| 4 | Check and replenish coolant to the marked level |
| 5 | Inspect oil pan level and top up if needed |
| 6 | Verify fuel quantity and refill |
| 7 | Check and replenish oil |
| 8 | Drain water and debris from the tank bottom |
| 9 | Check dust indicator and clean/replace filter |
| 10 | Adjust pedal stroke to meet specifications |
Contact us directly for more information.
All products are guaranteed for 12 months!